The Ford Barn - View Single Post

Tom Wesenberg · 10-27-2017, 11:06 AM

I would try a couple 2 x 6 boards clamped together on edge, then use another shorter board and port-a-power to push the center part outward on the driver's side. If that works, then rig it to do the same on the passenger side to move it inward.

Any possibility the top hinges got pushed over?

10-27-2017, 11:06 AM	#2
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Misaligned door hinges I would try a couple 2 x 6 boards clamped together on edge, then use another shorter board and port-a-power to push the center part outward on the driver's side. If that works, then rig it to do the same on the passenger side to move it inward. Any possibility the top hinges got pushed over?