View Single Post
Old 07-05-2020, 08:14 PM   #15
fred93
Senior Member
 
fred93's Avatar
 
Join Date: Nov 2010
Location: SPRUCE PINE NC
Posts: 446
Default Re: 29 Tudor electric wiper

Quote:
Originally Posted by jrelliott View Post
Just to make sure the motor works, check with an additional ground wire to a real frame ground. Not just some where on the body. If you have 6 Volts at the motor from the harness, then check the voltage at the ground side of the motor where the copper stap connects and I would guess that it is 6 Volts also. If it is, you need a good ground. Paint really causes grounding problems.
******************************************
Thanks for your reply

Please see #12
__________________
Why is there never enough time to do it right, but always enough time to do it over!!!
fred93 is offline   Reply With Quote