The Ford Barn - View Single Post

barnnone51 · 11-01-2019, 05:10 PM

Thanks Ford Barn and Ya"ll For the Search section for doing repair on
our Model A . I needed to change the Crankshaft pulley and I did a little
Search and saw were it was said to put your wrench on the drivers side
frame and rock the starter, bada bing nut came right off.It was a beautiful
thing no fuss no muss. It was a good thing that I had to change it because
found a sizeable crack on the fan.Well Thanks again now put it back together
and hit the road again...

11-01-2019, 05:10 PM	#1
barnnone51 Member Join Date: Apr 2014 Posts: 84	Crankshaft Pulley Removal Thanks Ford Barn and Ya"ll For the Search section for doing repair on our Model A . I needed to change the Crankshaft pulley and I did a little Search and saw were it was said to put your wrench on the drivers side frame and rock the starter, bada bing nut came right off.It was a beautiful thing no fuss no muss. It was a good thing that I had to change it because found a sizeable crack on the fan.Well Thanks again now put it back together and hit the road again...