The Ford Barn - View Single Post

Model A Ron · 04-15-2021, 11:41 PM

Below is what Snyder's has on their sight. I see 54.6 HP for the 5.5 head and 57.5 for the 6.1 head. Does that make any real difference in what you will feel when driving?

The A-6010-HC 5.5:1 High Compression Head made 38.16 HP @ 1400 RPM and 143.15 ft lbs of torque and
54.6 HP @ 2500 RPM and 114.7 ft lbs. of torque with the A carburetor.

The A-6010-HC6 6:1 High Compression Head made a little flatter torque in the low range from 42 to 47 HP @
1500 to 1700 RPM and 146.4 ft Ibs of torque and 57.48 HP @ 2500 RPM and 120.75 ft lbs. of torque with
the A carburetor.

04-15-2021, 11:41 PM	#1
Model A Ron Senior Member Join Date: Feb 2021 Location: Troutman, NC Posts: 717	SNYDER’S 5.5 head vs 6.1 Below is what Snyder's has on their sight. I see 54.6 HP for the 5.5 head and 57.5 for the 6.1 head. Does that make any real difference in what you will feel when driving? The A-6010-HC 5.5:1 High Compression Head made 38.16 HP @ 1400 RPM and 143.15 ft lbs of torque and 54.6 HP @ 2500 RPM and 114.7 ft lbs. of torque with the A carburetor. The A-6010-HC6 6:1 High Compression Head made a little flatter torque in the low range from 42 to 47 HP @ 1500 to 1700 RPM and 146.4 ft Ibs of torque and 57.48 HP @ 2500 RPM and 120.75 ft lbs. of torque with the A carburetor.