The Ford Barn - View Single Post - 1928 Multi disc clutch transmission advice

tmiller6 · 06-20-2020, 08:00 AM

I have a multi-disk in my ‘28.

Instead of the KR Wilson tool I was able to align everything in the splined pocket of the flywheel laying on the bench. I then used the chuck on my drill press pointed into the throwout bearing to safely compress the spring so I could install the nuts.

06-20-2020, 08:00 AM	#3
tmiller6 Senior Member Join Date: Jul 2010 Location: Livonia, MI Posts: 197	Re: 1928 Multi disc clutch transmission advice I have a multi-disk in my ‘28. Instead of the KR Wilson tool I was able to align everything in the splined pocket of the flywheel laying on the bench. I then used the chuck on my drill press pointed into the throwout bearing to safely compress the spring so I could install the nuts.