View Single Post
Old 07-29-2020, 10:35 AM   #11
Als48
Senior Member
 
Join Date: Feb 2020
Location: Paducah Ky
Posts: 279
Default Re: A few questions on a 8BA

My dad and my grandad both had flathead pickups.

Grandad had an F3 with a 239 and 4-speed with granny low. The clutch in that truck always had a tendancy to shudder and jerk, partly because it was geared very low, but a little troublesome. It also had an exhaust valve that tended to stick, even when it was driven a couple of times a week. Since that was their only vehicle my grandmother had trouble driving it, with a troublesome clutch and the clunky non-synchronized 4 speed.

Dad's 51 F-1 was more trouble-free with a 239 and three on the tree. He had a Jasper rebuilt engine installed when he first got it, due to engine trouble, so my memories are of a mostly good running trouble-free truck. I loved it. That was in the late 50's early 60's.
Als48 is offline   Reply With Quote