The Ford Barn - View Single Post

James Rogers · 01-14-2014, 05:47 PM

To sleeve a Model A engine, I bore it .123 over 4.00" and use a sleeve with .125 walls. That way it can be bored all the way to 4.00" in the future.

The answer to your question is, YES.

01-14-2014, 05:47 PM	#2
James Rogers Senior Member Join Date: May 2010 Location: Asheville,NC Posts: 3,104	Re: max overbore To sleeve a Model A engine, I bore it .123 over 4.00" and use a sleeve with .125 walls. That way it can be bored all the way to 4.00" in the future. The answer to your question is, YES. __________________ http://www.model-a-ford-4bangers.com/