Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Vern
As part of putting a new Burtz block in my roadster, I had to remove the oil pan from the old block. After draining the oil, I knew there was still oil in the drip pan and that the pump would drop along with the pan. Not wanting to drip more old oil onto the floor, I came up with a method of lowering the pan slowly and evenly. Taking a scissors jack, I put a thin wood board across the top, tied in place with zip-ties. I was able to get the pan low enough to slip the jack out, grab the pan and not make a big mess. Even so, I had a large pan filled with cat litter under the jack just to make sure.
|
Hi Vern,
That sounds like a super idea ! I Don't plan on dropping the pan anytime soon, but that looks like it would work out well !
Thanks Scotty