The Ford Barn - View Single Post

Synchro909 · 08-07-2016, 05:41 PM

Try a little heat on the head of the screws. Heat them till red hot with an oxy torch, allow to cool and undo. If they are still tight, I'd use an impact driver to move them. A drop of penetrating oil will help.

08-07-2016, 05:41 PM	#3
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 7,488	Re: Replacing generator field windings Try a little heat on the head of the screws. Heat them till red hot with an oxy torch, allow to cool and undo. If they are still tight, I'd use an impact driver to move them. A drop of penetrating oil will help. __________________ I'm part of the only ever generation with an analogue childhood and a digital adulthood.