Re: Shocks: Necessity or luxury?
Look, On the fronts , you're on your own, but the rear, I made my own brackets to go on the brake backing plates from angle iron. (Probably a lot more substantial than anything from Detroit) For my Town Sedan. These are copies of the shock brackets on my coupe.
I couldn't identify exactly what the old numbers were (Too much Rust) but we matched up a shock that worked from catalogs. What we came up with was the Monroe Gas-matic #59017. I think that is the correct number, it's the largest font of the four numbers on the shock box tab. cost? around $80. Feel free to ask me whatever.
Terry
|