The Ford Barn - View Single Post

Dean Lemoine · 08-28-2020, 05:16 PM

I recently installed Logolites LED “bulbs” in new reproduction headlights. Honestly I haven’t driven the car at night to see if they need adjusting or how bright they are. But, the low beams blink constantly while the high beam is fine. I was thinking it may be a wiring issue so I swapped the position of the LED on both lights. The low beam still blinks and the bright continues to be fine.
I e-mailed Logo today, no response yet.

08-28-2020, 05:16 PM	#5
Dean Lemoine Senior Member Join Date: Nov 2018 Location: Dahlonega, Ga Posts: 251	Re: convert to LED headlights I recently installed Logolites LED “bulbs” in new reproduction headlights. Honestly I haven’t driven the car at night to see if they need adjusting or how bright they are. But, the low beams blink constantly while the high beam is fine. I was thinking it may be a wiring issue so I swapped the position of the LED on both lights. The low beam still blinks and the bright continues to be fine. I e-mailed Logo today, no response yet.