View Single Post
Old 07-16-2020, 07:12 PM   #15
stewgee
Member
 
stewgee's Avatar
 
Join Date: Dec 2018
Location: Locust Grove, OK
Posts: 84
Default Re: Shifter spring compressor

Quote:
Originally Posted by stewgee View Post
Roger V you were spot on with the measurements of the dowel. Anything bigger than 1/2 inch would have been to big and would have made it difficult to feed the safety wire thru the spring. Anyway it worked rather well and that part of the rebuild is done. Thanks
Didn't have a wooden dowel but a 2 3/4 inch by 1/2" metal conduit worked just as well
stewgee is offline   Reply With Quote