Thread: Battery Move
View Single Post
Old 04-14-2021, 10:16 PM   #7
CWPASADENA
Senior Member
 
CWPASADENA's Avatar
 
Join Date: May 2010
Location: PASADENA, CA
Posts: 1,881
Default Re: Battery Move

I always use the ground cable for the disconnect. My reasoning is similar to removing the battery cables with no disconnect. You remove the ground first so if your wrench slips while removing the hot cable and touches ground you won't create an arch between the wrench and the ground. I'm sure others will offer different opinions.

I agree,

From a safety standpoint, always put the disconnect switch on the ground side.

Chris W.
CWPASADENA is offline   Reply With Quote