The Ford Barn - View Single Post

Ian in Mississauga · 03-28-2021, 07:02 PM

Spring is here and I went to start the car. I always clean the points to begin with. Next I shorted the points with a screw driver and got a bright blue 1/2” spark from the high voltage wire. Put everything back together then got in the car, turned on the gas and hit the starter. Starter worked fine but ammeter didn’t move. Put in new plugs and still nothing. Installed my spare distributor and car started in a split-second. I want to get the original distributor working. Where do I begin?

03-28-2021, 07:02 PM	#1
Ian in Mississauga Senior Member Join Date: May 2010 Posts: 136	Distributor dilemma Spring is here and I went to start the car. I always clean the points to begin with. Next I shorted the points with a screw driver and got a bright blue 1/2” spark from the high voltage wire. Put everything back together then got in the car, turned on the gas and hit the starter. Starter worked fine but ammeter didn’t move. Put in new plugs and still nothing. Installed my spare distributor and car started in a split-second. I want to get the original distributor working. Where do I begin?