Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Kurt in NJ
Yes I have run my car on the loaded emission test machine, both on regular gas and later on 10% ethonal gas, no changes except the gas
On regular gas my closed gav setting gave 4% CO
On 10%ethonal gas the closed gav settings gives 0.05% (and low power), changing spark timing didn't have much effect on the emissions, the exhaust manifold did get red though
If you want I could dig up the printouts
Reduced emissions , and slightly less fuel mileage, I still get over 20 though
|
Kurt,
Thank you for the good info.
1. It sounds like you are testing device is a "dynamometer" type emissions machine?
My meter only tests CO statically ... no way to test under load.
Yes I would be interested in the printouts.
I will send a PM.