View Single Post
Old 05-04-2014, 09:14 AM   #11
DICK SPADARO
Senior Member
 
Join Date: May 2010
Location: Altamont, NY
Posts: 1,004
Default Re: Flywheel Pressure plate balance issues.

If you feel the vibration at the bell connection of the trans you should look to check the condition of the U joint and the upper drive shaft bearing. If you have left the bearing out or the driveshaft is scoured from lack of lubricant at that area it will produce a vibration. Out of balance flywheel will make the engine shake not the trans.
__________________
dickspadaro.com
DICK SPADARO is offline   Reply With Quote