Quote:
Originally Posted by LeonardS
My level of worry about a sticking relay is ZERO! Even the U.S. made lifts are probably using a Chinese relay, since they probably supply all of them. Pay attention and if it sticks, unplug the power cord or pull the hydraulic release valve. You are required to be right at the pump to raise the lift, since the switch is on the pump. I’ve had 7 of the 4 post lifts over the last 25 years. 1 was U.S. made and 6 were Chinese copies. No problems with any of them.
|
Do you use your lifts commercially with up to 20 cycles per day. Lots of difference in use on these lifts between oil change shops, car dealers, and a guy in his home garage.....