View Single Post
Old 07-12-2018, 08:57 AM   #3
TJ
Senior Member
 
TJ's Avatar
 
Join Date: May 2010
Location: Napa,California
Posts: 6,042
Default Re: cowl water holes

Be sure to clean out the lower cowl, so the water will drain out. If it's never been cleaned out you will find a lot of dirt and debris in there. I go down in there with a real long screwdriver and loosen up the dirt, etc. I then tape a small hose to the bigger hose on my shop vac and vacuum out the debris. Make sure there is an opening so the water can drain out when you are done.
TJ is online now   Reply With Quote