[54vicky]

I"ll be damned never would have thought from a distance.that steering box grease is very sticky as it is designed to be.knowing that now it probably would have just been a matter of pulling the wire down into the column from bottom as once in there it does not need to move.as to your other question too damned cold for me or I would check my horn not having to blow very often I pretty sure I just use the ring.the way it goes together I think it is meant to be tilted? on angle when you push on ring.when working properly I have found it does not need a great deal of pressure leading to bending of ring also I recall having used the side bars as this tilts it also.try pulling the wire down from bottom as it does not move once it is in. once you pull it down try nothing to lose that way you can leave the grease saving you a mess to try and clean