The Ford Barn - View Single Post

Tom Wesenberg · 05-20-2017, 07:42 AM

I'm wondering why the armature was replaced? They rarely fail.

I leave the bushing as far towards the outer end of the housing as possible, for the best armature shaft support near the working end.
I see this bushing is quite recessed. OOPS, this is the inner end. Need to see the other side of the end plate.

05-20-2017, 07:42 AM	#3
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: New armature too big? I'm wondering why the armature was replaced? They rarely fail. I leave the bushing as far towards the outer end of the housing as possible, for the best armature shaft support near the working end. I see this bushing is quite recessed. OOPS, this is the inner end. Need to see the other side of the end plate. Last edited by Tom Wesenberg; 05-20-2017 at 08:33 AM.