Quote:
Originally Posted by Fortunateson
Will do then. I would think that new springs would be without the variance but then they would be for a stock cam. I was hoping for an "right out of the box" yes or no.
|
All springs need to be measured, just like ring gap, bearing clearance, etc. There really is no such thing as correct or no variance right out of the box. They may or may not be correct, that is why you need to check! You might be able to just install them out of the box, but then you never know what value the spring pressure really is and if it is consistent. You also need to determine the install height before you can determine the spring pressure. The install height varies based on the valve seat and face of the valve.