Quote:
|
Have you tested the readings across the terminals ?
|
Quote:
|
do I need to disconnect the wires on the terminals?
|
You'll have to disconnect at least one of the low tension wires.
Quote:
|
There is no apparent way for me to stretch my wires to reach the coil terminals if I turn the coil right-side-up.
|
For a trial run, get a piece of stranded wire (8 - 10 inches long)and put a ring terminal on each end, use a small machine screw (#6 or #8) to connect one end of the wire to the wire that came off the coil, tape it up. put the other end on the coil, simples.