Re: 37' pickup, lower door seals
This is a photo of the lower portion of my door. Notice the half inch indentation that goes across the bottom, with holes for fasteners. Seems to me that a flap from a seal might go between the steel of the door and the interior door panel. Just wondering since I am going to make my own panels. C&G lists the seals for 10.00 a pair, but only shows a cross section. Need more info than that. Thought maybe someone might have done this before. I could put a layer of thin foam tape down and use the holes to fasten the lower edge of the panel. Thanks for any info on the lower door seals you might have. - Q
|