The Ford Barn - View Single Post

JohninKuranda · 01-18-2016, 04:05 AM

In restoring my 28 Phaeton I noticed some time ago that the gap in the Distributor bodies that I have for the spark control seemed to vary in size. Of the three bodies I have, the width of the gap is 0.975", 0.998" and 1.053". All do not appear to have been modified, but.......

Was/is there a standard size, or are these variations due to different manufacturers?

Just wondering!

01-18-2016, 04:05 AM	#1
JohninKuranda Senior Member Join Date: Jan 2014 Location: Kuranda, Queensland Australia Posts: 186	Distributor body gap variances In restoring my 28 Phaeton I noticed some time ago that the gap in the Distributor bodies that I have for the spark control seemed to vary in size. Of the three bodies I have, the width of the gap is 0.975", 0.998" and 1.053". All do not appear to have been modified, but....... Was/is there a standard size, or are these variations due to different manufacturers? Just wondering! Last edited by JohninKuranda; 01-18-2016 at 04:06 AM. Reason: bad grammar!