View Single Post
Old 05-26-2020, 01:24 PM   #3
Senior Member
kenparker's Avatar
Join Date: May 2010
Location: Van, Texas
Posts: 1,122
Default Re: Which modern valve kit and valve guides?

The difference in spring length as mentioned is one issue. The other is... The tube type (Brattons) have to be pressed in with time, patience, a press or a hammer and brass driver to protect the guide from flarring. Snyders are press in with yur fingers or thumb - just likek original guides.

I have used both. ken
kenparker is offline   Reply With Quote