09-06-2020, 04:49 PM
|
#10
|
Senior Member
Join Date: Sep 2019
Location: Fort Gratiot, Michigan
Posts: 2,296
|
Re: New Hub Cap Installation
Quote:
Originally Posted by duke36
Pry the tabs very slightly just to get a loose friction fit. Bend over about 5 tabs while centering the cap in the opng. Have never had success with the o rings.
Then take clear GE or others silicon sealant to help hold the tabs and perhaps a little around the inside edge. It wipes off and doesn't mar the powder coat.
|
Follow this you can't go wrong !
|
|
|