Hi Mitch,
Thanks for the picture, it really helps. Base on your description, I'll take a look/see on the door and roof wood to see if I can locate where the top rubber bumper matches up with the top of the door. If I run into any issues or problems, I'll be back.
Thanks again!
Quote:
Originally Posted by Mitch
This is a lousy picture of my driver's side door, which I haven't restored yet. This is the bottom rubber and it's held in place with metal strips that press/pinch the rubber in place.
The top rubber screws into the roof wood and is at the rear where the top of the door is flat across (no raised rib). No picture since I have it apart for paint work.
|