Quote:
Originally Posted by BRENT in 10-uh-C
Clamp a string onto the front and the back of each frame rail and pull the string taunt. You will see really quickly if it is bent. Also check the measurements diagonally to verify that the measurement is the same in an 'X' pattern.
Plenty of information how to heat shrink a frame back to being straight here in the archives.
|
too add on the string idea.
I use a string tied to two 1 gallon jugs to do my alignments. its a good way to put a straight line in the air next to something
also when im picking out boards. i look down them the long way it becomes easy to see a wow in there.