View Single Post
Old 08-07-2016, 05:41 PM   #3
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 5,284
Default Re: Replacing generator field windings

Try a little heat on the head of the screws. Heat them till red hot with an oxy torch, allow to cool and undo. If they are still tight, I'd use an impact driver to move them. A drop of penetrating oil will help.
__________________
Accidents hurt. Safety doesn't.
Synchro909 is offline   Reply With Quote