The Ford Barn - View Single Post

Tim R Hansen · 11-17-2019, 08:42 AM

Just purchased a data plate for the firewall on my late 31 Coupe. The rivet holes in the firewall don't line up with the holes in the repro plate. Holes are off by about 1/16" My firewall is not a re-stamp. Anyone run into this?

11-17-2019, 08:42 AM	#1
Tim R Hansen Junior Member Join Date: Nov 2017 Posts: 11	Data plate rivet holes don't line up Just purchased a data plate for the firewall on my late 31 Coupe. The rivet holes in the firewall don't line up with the holes in the repro plate. Holes are off by about 1/16" My firewall is not a re-stamp. Anyone run into this?