View Single Post
Old 06-11-2021, 05:02 PM   #13
JSeery
Member Emeritus
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
Default Re: '40 Gas, Oil pressure Gauges

Quote:
Originally Posted by Deadforty View Post
Terry,Oh, and others;

I purchased the pump from Speedway. It was a Melling M19 Std volume oil pump. I figured I did not need a high volume, high pressure pump since I was only building a "warmed" street engine. I guess in my great ignorance of flatheads I chose the wrong pump. Right now, I'm really looking for answers and help to my questions about the gauges, otherwise, I'll just replace the original panel with something that all the gauges will work.

Thanks in advance to all helpful suggestions thus far. I'm checking them out.
As long as you have the correct pick-up for the pump and the screen is the correct distance from the oil pan, it should be fine.

Did you see the attachment to post #3 on how to check the gauges? Is there a different question you are asking? Maybe I'm not understanding what you question is.
JSeery is offline   Reply With Quote