Re: Fan clearance issue
Here's a few more photos that may help you design a solution. I made the alum. fan pulley back in 2014. BOB DRAKE now sells them at a fair price. Go to his web site.
Keep in mind each situation is different. My 8BA is in a 40 using wide belt 8RT water pumps and a Walker radiator. Make a mock up of your parts before you start taking your car apart.
My fan is 16 in. There are folks who have other ways of doing this.
Good luck.
Last edited by 19Fordy; 10-25-2020 at 03:16 PM.
|