The Ford Barn - View Single Post

19Fordy · 01-30-2020, 10:33 AM

The height of the fuel pump stand must be compatible with the stock fuel pump push rod so you get enough "travel" to actuate the fuel pump. Do you have a stock 8BA intake you could use for measurements?

01-30-2020, 10:33 AM	#2
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,921	Re: fuel pump stand swap The height of the fuel pump stand must be compatible with the stock fuel pump push rod so you get enough "travel" to actuate the fuel pump. Do you have a stock 8BA intake you could use for measurements?