Quote:
Originally Posted by yblock57
Thanks for the tips on the throttle valve! One of the shops said they fixed a 'sticky' throttle valve in there, but no change was observed. I have no way of knowing exactly what they did.
I pulled the valve out of the governor and made a new video. The piston has a very slight amount of side to side play. Could this be a possible issue with pressure loss? Moves nice and smooth without any roughness. Here's the video:
https://youtu.be/u06DsbFrAh8
I need to get a pressure gauge and test. Do y'all happen to know the thread of the mentioned port above the throttle lever? Looking at something like this:
https://www.amazon.com/JIFETOR-Press...NsaWNrPXRydWU=
I'd like to get some pressure readings before I drop the pan again.
Appreciate all the help!
|
The pressure port is 1/8" pipe thread.