Quote:
Originally Posted by Bob C
The axle housings and axles are different between the rear ends with the different braking systems. I also think the wheel bearings and hub may be different. Your probably going to need hubs and drums for the separate system.
Bob
|
The more I look at it, the more I agree. Even with the ebrake panel removed, it looks like the taper will hold the hub and rum outboard from where it needs to go.Hopefully someone will need my narrow drums for an early non emergency brake setup? Will start looking on The Swap Meet, CL, Ebay etcetera for the ebrake style hubs and drums. Thanks!