The Ford Barn - View Single Post

hotrodcbx · 06-14-2021, 03:06 PM

Today I took the heads/intake off on the driver side and removed the valves and lifters. All the clearances on cyl. 4 - 8 were extreme, some as high as .075. The lifter screws were loose but otherwise the lifter faces looked great, no sign of cam interference.
I took them apart and saw a crappy way of securing the adj. screw to the lifter body. There was a 1/8" hole drilled in the side of the screw with a nylon insert which fell out as I disassembled the lifter. There was no interference fit at all!!
I then put the screw in my vice and "distorted" the threads in a number of different areas. Finally I re-assembled with red locktite. Hope it works, they seem really tight now. I believe JAX has improved on these lifters as mine must have been an early production run... I'm still disappointed, for the price I expected more..

06-14-2021, 03:06 PM	#9
hotrodcbx Senior Member Join Date: Jul 2010 Posts: 136	Re: JAX vintage valve components Today I took the heads/intake off on the driver side and removed the valves and lifters. All the clearances on cyl. 4 - 8 were extreme, some as high as .075. The lifter screws were loose but otherwise the lifter faces looked great, no sign of cam interference. I took them apart and saw a crappy way of securing the adj. screw to the lifter body. There was a 1/8" hole drilled in the side of the screw with a nylon insert which fell out as I disassembled the lifter. There was no interference fit at all!! I then put the screw in my vice and "distorted" the threads in a number of different areas. Finally I re-assembled with red locktite. Hope it works, they seem really tight now. I believe JAX has improved on these lifters as mine must have been an early production run... I'm still disappointed, for the price I expected more..