The Ford Barn - View Single Post

tubman · 09-11-2019, 03:39 PM

"Jersey Devil" - Don't bother trying to find the clips as I believe I have them all. I just need to know where they go. I parted out a '50 about 30 years ago and made sure I saved all the clips, etc. The kick-down switch had a broken terminal and the wiring harness was toast, but I believe I got everything else. I was able to source the switch and Harness, so once I get this sorted out, I should be ready to go.

What I could use is a wiring diagram showing ALL of the color-coding on the wiring harness. The generic ones I have been able to find on the internet don't have the color codes at all, and the one in the '49-'51 shop manual only shows about half of them.

When I get this done, I will be looking for a 4.11 "chunk".

09-11-2019, 03:39 PM	#10
tubman Senior Member Join Date: Dec 2013 Location: Minnesota, Florida Keys Posts: 10,319	Re: Overdrive lockout cable on a '51 Ford "Jersey Devil" - Don't bother trying to find the clips as I believe I have them all. I just need to know where they go. I parted out a '50 about 30 years ago and made sure I saved all the clips, etc. The kick-down switch had a broken terminal and the wiring harness was toast, but I believe I got everything else. I was able to source the switch and Harness, so once I get this sorted out, I should be ready to go. What I could use is a wiring diagram showing ALL of the color-coding on the wiring harness. The generic ones I have been able to find on the internet don't have the color codes at all, and the one in the '49-'51 shop manual only shows about half of them. When I get this done, I will be looking for a 4.11 "chunk". Last edited by tubman; 09-11-2019 at 05:02 PM.