The Ford Barn - View Single Post - wide 5 hubcaps 1936-1939

Kube · 11-03-2013, 05:12 PM

Authentic caps were two pieces. The stainless piece was pressed over the metal cap.
To remove the stainless piece, drill a small hole through the back of the metal part, being careful not to go through the stainless cover. Apply compressed air through the hole while the stainless cap lays face down in a towel.

11-03-2013, 05:12 PM	#2
Kube Senior Member Join Date: May 2010 Location: Wisconsin, USA Posts: 8,986	Re: wide 5 hubcaps 1936-1939 Authentic caps were two pieces. The stainless piece was pressed over the metal cap. To remove the stainless piece, drill a small hole through the back of the metal part, being careful not to go through the stainless cover. Apply compressed air through the hole while the stainless cap lays face down in a towel. __________________ "I can explain it for you. However, I can't understand it for you".