source for V8 pressure plate?
The V8 pressure plate, which is installed on the lightened Model A flywheel, is supposed to be a lighter push. I have heard folks complain that the V8 pressure plate they purchased was quite heavy, probably due to heavy springs used by the builder. I need to purchase a V8 pressure plate to install on my Burtz flywheel, has anyone recently acquired one that won't take a monster leg to push?
On that same note: does the 5/8" finger height apply to the V8 pressure plate like it does to the conventional Model A pressure plate?
__________________
JayJay
San Francisco Bay Area
------------------------
1930 Murray Town Sedan
1931 Briggs S/W Town Sedan
|