The Ford Barn - View Single Post - Why use hammer on full floating rod inseerts?

Ol' Ron · 08-16-2019, 12:05 PM

we only cut the cap, this shortens the length of the rod. only by a few thou.. Not a perfect solution. but it works.

You have to under stand, most of us work on a limited budget. However,even if I had unlimited funds, I enjoy making things and improvising .
Remember, it's the joinery joinery , not the destination.

"joinery" ??????

08-16-2019, 12:05 PM	#14
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,860	Re: Why use hammer on full floating rod inseerts? we only cut the cap, this shortens the length of the rod. only by a few thou.. Not a perfect solution. but it works. You have to under stand, most of us work on a limited budget. However,even if I had unlimited funds, I enjoy making things and improvising . Remember, it's the joinery joinery , not the destination. "joinery" ?????? Last edited by Ol' Ron; 08-16-2019 at 10:17 PM.