The Ford Barn - View Single Post

lindy williams · 11-20-2013, 09:13 PM

The upper hinge shown in the photo does not appear to be correct for a '30 coupe. The correct hinge should be bent up at the rear edge 90 degrees to form a channel for the upholstery cardboard that covers the inside of the wood header .

11-20-2013, 09:13 PM	#9
lindy williams Senior Member Join Date: May 2010 Posts: 335	Re: Coupe Windshield Hinge The upper hinge shown in the photo does not appear to be correct for a '30 coupe. The correct hinge should be bent up at the rear edge 90 degrees to form a channel for the upholstery cardboard that covers the inside of the wood header .