Re: Clutch replacement, 1932 Coupe
It's all been said, but I wondered why the vehicle is running a split wishbone when a stock one would (probably) work.
As he has wire wheels on 40 - 48 drums/hubs, make sure there is a spacer under the centre of the wheel. The wires are not designed to sit on a flat surface.
Can I just add t6hat you've come to the right place. You're amongst friends here. Please illustrate any questions with lots of photos and we will do our best to help.
For info he has 37-40 type spindles too. (roundback). Also the gearbox casing looks to be a later type.
Edit: Ignore above re spindles. They are squareback as stated below.
Just noticed tube shock direct to axle web.
Last edited by Mart; 03-17-2021 at 05:19 PM.
|