The Ford Barn - View Single Post

Mel Gross · 10-13-2020, 08:02 AM

FYI
2 of the emergency brake linkage pins are on backwards. The heads of the pins are to be facing you and all of the cotter pins are inside. If you leave them as it, they will rub against the hub and eventually wear down to the cotter pin and beyond. If you enlarge the diagram on this tread, you will see the direction the pins need to be.

10-13-2020, 08:02 AM	#11
Mel Gross Senior Member Join Date: May 2010 Posts: 909	Re: Rear brake assembly diagram FYI 2 of the emergency brake linkage pins are on backwards. The heads of the pins are to be facing you and all of the cotter pins are inside. If you leave them as it, they will rub against the hub and eventually wear down to the cotter pin and beyond. If you enlarge the diagram on this tread, you will see the direction the pins need to be.