Wheel stud replacement SOLVED: '42-'48 hubs & drums
OK, I would like to replace the drums on my '42-'48 hubs. With my current ones, one has a odd "hump" when I do run out test (shame for it's at .010" now) and the other is at .040" and needs to be turned.
I happen to have NOS Ford drums that I'd like to replace the fronts with and NORS stock for the rears.
The question is: Does anyone have the Dorman part # for the correct stud to replace the OEM ones once I cut them out?
Would the front and rear studs be different lengths?
I believe I'll need to ream the hole in the hole slightly since the replacements will be knurled.
I searched for about an hour last night and keep getting confirmed Dorman part numbers for wheel studs for the '40 style (drum OUTSIDE of hub) set ups.
Thanks,
Last edited by Tim Ayers; 06-20-2020 at 10:14 PM.
|