The Ford Barn - View Single Post

Dick Deegan · 10-17-2013, 03:26 PM

Thanks Dave and the others. I am going to resurface only one head or two at the most. The machine belongs to a friend of mine and is a machine of Taiwanese origin. I still have to check to see if it even has enough travel to machine a head.

Dick

10-17-2013, 03:26 PM	#9
Dick Deegan Senior Member Join Date: May 2010 Posts: 527	Re: Head Surfacing Mill Setup Thanks Dave and the others. I am going to resurface only one head or two at the most. The machine belongs to a friend of mine and is a machine of Taiwanese origin. I still have to check to see if it even has enough travel to machine a head. Dick