The Ford Barn - View Single Post - Bent frame--how bad is it?

Oldbluoval · 07-18-2021, 02:47 PM

Have you also checked for square? I’d also pull a sting from front to back and see if the 1/8 is really a bit more than over just the 4’ span....I bet it is.
The car has to assemble full length so if the 1/8 turns into 1/4 you may be getting close to vertical alignment issues on gaps and hood alignment
Just imho

07-18-2021, 02:47 PM	#2
Oldbluoval Senior Member Join Date: Jun 2015 Location: Signal Mtn, TN (SE TN) Posts: 2,372	Re: Bent frame--how bad is it? Have you also checked for square? I’d also pull a sting from front to back and see if the 1/8 is really a bit more than over just the 4’ span....I bet it is. The car has to assemble full length so if the 1/8 turns into 1/4 you may be getting close to vertical alignment issues on gaps and hood alignment Just imho