The Ford Barn - View Single Post

Bill G · 12-17-2017, 01:59 PM

Filler tube:

Yes, pressed in with just the pressure of the tube against the engine block. A couple whacks back and forth with a rubber mallet should free it up. Take a picture of the baffles inside the tube before taking it off. You will want the baffle position to go back in its original orientation as its position helps in letting oil splash back up the tube.

12-17-2017, 01:59 PM	#2
Bill G Senior Member Join Date: Jun 2017 Location: Walla Walla, WA Posts: 1,045	Re: Mechanical Questions Filler tube: Yes, pressed in with just the pressure of the tube against the engine block. A couple whacks back and forth with a rubber mallet should free it up. Take a picture of the baffles inside the tube before taking it off. You will want the baffle position to go back in its original orientation as its position helps in letting oil splash back up the tube.