The Ford Barn - View Single Post

CWPASADENA · 11-04-2019, 05:53 PM

I am in the process of installing a reproduction side curtain pan in a '31 Roadster.

It appears that the pan attaches to the underside of the body sub rails and cross channels. Is this correct.

Does anyone have a good picture of the pan as installed from the underside of the body as well as a picture from above.

My car has all the original sub rails and cross channels in place and are not modified but all the floor sheet metal had been removed before I got the car.

Thanks for your help.

Chris W.

11-04-2019, 05:53 PM	#1
CWPASADENA Senior Member Join Date: May 2010 Location: PASADENA, CA Posts: 1,884	Side curtain pan iastallation I am in the process of installing a reproduction side curtain pan in a '31 Roadster. It appears that the pan attaches to the underside of the body sub rails and cross channels. Is this correct. Does anyone have a good picture of the pan as installed from the underside of the body as well as a picture from above. My car has all the original sub rails and cross channels in place and are not modified but all the floor sheet metal had been removed before I got the car. Thanks for your help. Chris W.