Quote:
Originally Posted by Ronnieroadster
It works like I wrote feed in 6 volts it ill output where you set it you want the 12 volt out put thats what you get. There ADJUSTABLE for desired setting pretty easy to understand.
|
Ok so you will have it show 12v all the time...thatīs as exciting as painting a needle on it with a crayon
Thought you had found some way of actually making them show what was going on with the 6v charging system...
A simple squarewave from a 555 timer and a voltage doubler would give you a 12v signal proportional to the 6v input...that way you should be reading double the voltage you have.