View Single Post
Old 10-07-2020, 04:54 PM   #52
Bored&Stroked
Senior Member
 
Bored&Stroked's Avatar
 
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,013
Default Re: Question on Cam Gear Marks - UPDATE

Just to go over the timing once again: Are you still saying that it has 20 degrees of advance at startup . . . and about 35 when running at a decent RPM (say 2500)? If this is still the case, then my guess is either the CAM is off, or your TDC and timing marks are off. It should start just fine with low advance and the total should be in the 22 - 25 total degrees of advance range.
Bored&Stroked is offline   Reply With Quote